IP Camera HubMODEL EVIDENCE
Reolink RLC-520A: local streams, power and setup evidence
On this page
Outdoor PoE camera candidate with revision-sensitive video specifications.
CameraViewer hardware test: pending. Published camera features do not confirm app playback, audio, camera movement or recording access.
Does it fit your installation?
Worth checking for
An outdoor wired network with a suitable PoE switch or injector.
Look elsewhere for
A Wi-Fi-only installation or a purchase based only on the model name.
Plan the cable and PoE source together. The inspected US page calls for active 802.3af power. A network cable alone does not supply it. Confirm the switch or injector specification and the cable route before buying.
Documented model facts
- Connection
- RTSP; ONVIF in applicable Reolink family documentationManufacturer source ↗
- Video codec
- H.264 on inspected US specificationManufacturer source ↗
- Network
- EthernetManufacturer source ↗
- Power
- IEEE 802.3af, 48 V active PoE; 12 V DC alternativeManufacturer source ↗
- Local storage
- microSD card slot; recorder route depends on setupManufacturer source ↗
- Placement
- Fixed outdoor dome-style cameraManufacturer source ↗
Check the exact hardware before buying
Reolink documentation differs between revisions and regional pages. Record the hardware identifier, firmware and selected stream codec. The inspected US H.264 listing cannot settle the codec for every RLC-520A offered by a seller.
Match the model, region and hardware revision in the seller listing with the camera label and official documents. Check the included power supply, mounting parts, storage and return conditions. We have not verified current stock, prices or a merchant listing for this model.
Keep the camera hardware identifier and firmware in your setup notes. If the supplied version differs from the inspected source, check that version before copying its stream or power settings. An accessory or storage service can have separate requirements.
Prepare a local viewing test
Start with one camera on the intended local network. Record the stream address, selected codec and documented camera account. Keep credentials out of shared notes. Verify reachability and the selected video route separately from any camera controls.
Use the Reolink setup guide for the manufacturer steps. A working stream in another client is useful evidence for diagnosis; CameraViewer still needs a test on this exact camera, firmware and app version.
Sources and limits
CameraViewer development briefCameraViewer product team · Owner-supplied brief · App behavior not independently tested
Publication date: Not stated · Development brief
Simulator captures demonstrate manual RTSP setup, decoded H.264 fixture video, saving a camera and full-screen viewing.
Owner-supplied brief; screenshots have not been independently examined here. Test media demonstrates app behavior, not physical-camera compatibility.
Read the source ↗Which Reolink Products Support CGI/RTSP/ONVIFReolink · Selected documentation claims reviewed 2026-10-02
Publication date: Not stated · Manufacturer or standards documentation
Must connect to Reolink Home Hub
Quote applies to the listed battery Wi-Fi camera row. Model, power and Hub/NVR conditions vary; no CameraViewer hardware test.
Read the source ↗Reolink RLC-520A US product specificationsReolink · Selected documentation claims reviewed 2026-10-02
Publication date: Not stated · Manufacturer or standards documentation
H.264
Selected US specifications inspected. Exact region, hardware revision and firmware must match; no physical-camera app test or merchant listing verified.
Read the source ↗Prelaunch content. Manufacturer protocol documentation and app test evidence describe different things.